LMA100P型水份測定儀

• 石英加熱源、快速、均勻加熱樣品
• 檢測下限可50ppm
• 強大的數據庫，擁有過5000多種測試程序
• 測試結果與卡爾費休滴定(Karl Fischer)法的結果相
• 可以連接四個加熱模塊，能同時測定多達4個樣品，用于樣品量大的生產檢驗
• 內置打印機,可當場打印數據

規格參數：

模塊化設計               儀器由控制模塊和加熱模塊組成，一個控制模塊多可連接四個加熱模塊

水分測量范圍             0.005-99.995%，可測量到50ppm的含水量                        

加熱源                     四組平行紅外石英管                                                            

稱重傳感器                采用單體傳感器                                                            

溫度范圍                  30℃-210℃，以1℃調整                                                       

待機溫度                  30℃-160℃，以1℃調整                                                      

稱重范圍                  100g                                                                              

稱重讀數             0.1mg                                                                           

稱重重復性               &plun;0.1mg                                                                         

儀器可讀性                0.001%                                                                        

程序存儲                  可存儲300個程序，并可以數字和字母命名                                

統計分析                   平均/sd/rsd/高/低                                                          

存儲結果                  999個測量結果                                                           

結果顯示                  水份%，干重%，干重g,揮發份%，水份ppm                          

打印                       內置打印機                                                                     

接口                       串行，U,以太網                                                            

更多產品及優惠，請撥：、、、、