儀器分三種型號: ME-279/110V , ME-279L , ME-279/ 220V ；
測量范圍：&plun;3000V自動變換性 ；
：0.1％&plun;0.003％/℃ ；
響應速度：<3ms ；
頻率響應：>300Hz&plun;3dB ；
漂移：<0.01V/hr ；
雜訊：<0.3Vrms或2Vp-p ；
表面解析度：1.75mm之Model1034E&S探棒在0.5mm距離下，解析度為2.5mm ；
記錄用輸出：典型為BNC接頭&plun;18V
單位：CE、UL
需搭配：Model 1034系列探棒
電輸入電壓： 110V或220V可選
279
ISOPROBE® Elerostatic VoltmeterThe Model 279 ISOPROBE® Elerostatic Voltmeter measur surface potential in the range of &plun;3000 volts without containg the measured surface It featur high-accuracy (0.1%), drift-free measurements that are almost fully independent of probe-to-surface separation. Its low-profile dign is optimized for rack mounting of multiple 279's in a minimum space.
Side- and end-viewing prob accommodate various mounting requirements. Specialty high-rolution prob allow the 244A to rolve spot diameters as all as 1 mm. Prob include air purge capability to prevent ingrs of particulate.
• Elerophotographic measurements• Radiation effe studi• Eleret rearch• Eleric field studi• Procs monitoring and control• Integrated circuit manufauring and handling A. Applications:
Model 279 ISOPROBE® ELEROSTATIC VOLTMETER tak advantage of Monroe’s years of experience in
dign of reliable instruments for N-CONTAING measurement of elerostatic potential combined with
modern semiconduor techlogy. A full sperum of proven-dign interchangeable prob expos broad new
areas for exploratory rearch as well as providing a precision instrument for routine applications in elerostatic
measurements. Some tical and potential applications include:
?? Elerophotographic and xerographic measurements
?? IC manufauring and handling
?? Materials evaluation
?? Eleret rearch
?? Static elerification, eleric field studi
?? Procs monitoring and control
B. Featur:
?? Low profile half rack size for multi-channel applications
?? Full complement of interchangeable prob
?? Seleable recorder output range
?? LED meter with “blackout switch” for darkroom applications
C. Range:
0 to &plun;3000 volts DC
D. Accuracy:*
0.1% of full scale, ?0.003%/?C over +20 to +40?C range (at recorder output). Useable to +50?C.
E. Speed of rponse:*
For tical input step: <3ms (10% to 90%)
for 1kV step: <2½ms (10% to 90%)
for 2kV step: <3½ms (10% to 90%)
for 3kV step: <4ms (10% to 90%)
F. Settling time:
<6½ms to 1% of final value.
G. Frequency rponse:
all signal frequency rponse tically ?3db to >300Hz.
H. Drift:*
<0.01V/hr after 1 hr stabilization (0.003V/hr tical). t measurably affeed by 10?C temperature
variation or chang between 10% and 90% relative humidity.
Page 2
I. ise:*
<0.3mV rms or 3 millivolts peak-to-peak wide band at 1/1000 output.
J. Surface rolution:
Determined by probe aperture size and surface-probe separation. Standard te 1034E & S prob
with 0.07” (1.75mm) aperture will rolve a 0.10” (2.5mm) spot at 0.02” (0.5mm) separation.
K. Recorder output:
Comprsed og output is input divided by 1000 (standard) or 100 or 200 (faory seleable)
Tical maximum dynamic range at isolated BNC conneor is ?18 volts for external loads greater
than 10k?.
L. Output filter:
Bsel low p filter with 1.2ms constant delay.
M. Size:
1.7 x 8.2 x 15.1 inch (44 x 208 x 384mm), 1.75” rack mounting available (1 or 2 per rack).
Weight 4 lb. (1.8kg).
N. Power requirement:
100, 120, 230 or 240 VAC, ?10%, 50/60Hz, 15 watts.
Fuse 1/4A for 100 & 120 V (Littelfuse 313.250 or equiv.)
Fuse 1/8A 5x2mm for 230 & 240 V (Littelfuse 217.125 or equiv.)
