【調軌機產品型號】TES-1050

【調軌機產品說明】

一機可適用多種規格螺絲1.0--5.0可調（1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0）可使用特殊螺絲，1：1短螺絲，帶墊片螺絲都可以通用。

【調軌機產品詳細】

1、一機可適用多種規格螺絲 , 1.0--5.0可調（1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0）;

2、 可使用特殊螺絲， 1：1短螺絲，帶墊片螺絲都可以通用;
3、軌道調整方便!螺絲機的軌道可以抽出來自由調整！簡單易懂，操作方便，無卡螺絲現象 ;

4、螺絲在滾筒內進行運動落斗，凡是未進入軌道的螺絲都被清除到滾筒內進入下個循環。可自由調整工作速度大小， 通過調整震動強度來改變速度，螺絲到達取點位置不會前后抖動而影響工作效率;

5、送料與振動驅動獨立控制，可自由設定理想的延時停止時間，當非正常情況產生時，螺絲機會啟動故障報警功能,操作起來和其它螺絲機一樣簡單;

6、當取出螺釘時,對螺釘頭部位置,只要把批頭放入批頭導向處, 順著導向下滑,然后朝面前把螺釘拉出即可;

7、比起傳統螺絲盤來,每個螺釘可以節省1.4秒的時間求生產率可達 4倍;

8、容易操作,即使生手也能馬上學會操作方法;

9、不必對正螺釘,只需將螺釘成批投入供料室內即可;

10、廣泛適用于各種類型、長度的螺釘;

11、體積小巧，不占空間;

12、自動導向,配合電批或風批,無卡螺絲現象!是代替傳統螺絲機的理想產品;

13、計數螺絲機有計數功能，0-9999任意設定，量到報警。

應用：手機、硬盤、鍵盤、電腦、家電、風扇、電子、塑膠、音箱、電器、玩具、DVD、通訊設備等。

TES  Series

【Name】TES  Series

【Mode】TES-1050

【 Product description】

Applicable to several specifications screw with one equipment,1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), applicable to special screws, 1:1 short screw、 screw with washer .

【 Features】

1、Applicable to several specifications screw with one equipment,1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0)；

2、Applicable to special screws, 1:1 short screw、 screw with washer;

3、It is easy to adjust track，the track can be pulled out to adjust freely, easy to understand and operate，don’t block screw;

4、Screws move with the roller and fall at the high position, the screws, which did not enter the track, will move into the next cycle. The working speed can be adjusted by adjust the vibration strength ,screw does not shake at the taking point;

5、Feeding and vibration-driven are independent controlled, the residence time can be set freely, the equipment will launch failure alarm at non-normal conditions.Operation is as easy as other screw equipment；

6、When you take the screw, you needn’t paying special attention to the position of the screw head, just put the drill tip into the guide, then slide along, the screw will be pulled out；

7、Compared with traditional screws, this equipment can save 1.4 seconds each time, productivity increased by 4 times；

8、Easy to operate, even novices can quickly learn how to operate；

9、Don’t need aligning the screw, just put screws into the hopper;

10、Widely applied to many screw types with different length and head shape;

11、Compact, less space；

12、Auto-guide, working with the electrical or air screwdriver, won't block screw. It is ideal product to replace the traditional products；

13、This mode has count function , 0-9999 can be set , and launch alarm at the set number.

Application: Cell phones, hard disk, keyboard, computer 、DVD 、Home appliances、 fans 、electronics、plastics、electrical appliances, electronic toys, electrical communication equipment etc…